ACME XP-5000SZ F, Руководство пользователя

Страница: 9 / 40

4.2 Lamp
Osram HTI1400W/PS Lok-it:
1. Because of its high internal pressure, there might be a risk that the Discharge lamp would
explode during operation. The lamp emits intense UV radiation which is harmful to the eyes
and skin. The high luminance of the arc can cause severe damage to the retina if you take a
close look at the lamp.
2.
To protect the lamp, always turn off the lamp first (via control panel or DMX controller) and let
the unit run at least five minutes to cool down before switching off the mains supply. Never
handle the lamp or luminary when it is hot.
3.
Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured alcohol
and wipe it with a lint free cloth before installation.
4.
The lamp generates UV radiation. Never operate the lamp without appropriate shielding.
5. When ling up, the lamp operates at high pressure and there is a slight risk of arc tube rupture. The
risk increases with age, temperature and improper handling of the lamp. Do not use the lamp longer
than its lifespan.
6. Make sure the lamp is located in the center of the reflector for the best projection.
DANGER!
Install/change the gobo-wheel with the device switched off only.
A
8B