ACME WHACK XP-231 BEAM, Руководство пользователя, Страница: 19 / 36

7.3 DMX Address Setting
By using a universal DMX controller to control the units, you have to set DMX address from 1 to
512 so that the units can receive DMX signal.
Press the MENU button up to when the DMX Address is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to change the DMX512 address. Once
the address has been selected, press and keep ENTER button pressed up to when the display stops
blinking or storing automatically 8 seconds later. To go back to the functions without any change
press the MENU button again. If you use please refer to the following diagram to address your
DMX512 channel for the first 4 units
：
16 Channels:
15 Channels:
19 Channels:
20 Channels:
7.4 DMX Control
16 Channels (Mode 1):
Channel
Value Function
1
000 - 255
Pan
0 °

540°
2
000 - 255 Pan Fine
3
000 - 255
Tilt
0 °  270°
4
000 - 255 Tilt Fine
5
000 - 255
Pan/Tilt Speed
：
Fast  Slow
6 000 - 049
050 - 059
Special Function
Null
Pan/Tilt fast mode
A
18B