ACME STAGE PAR 400 ZOOM IP, Руководство пользователя, Страница: 14 / 24

Reset
Select Reset, press the ENTER button to confirm, present mode will blink on the display, use the
UP/DOWN button to select No or Yes, press the ENTER button to store. Press the MENU button
back to the last menu or let the unit idle 30 seconds to exit menu mode.
Factory Setting
Select Factory Setting, press the ENTER button to confirm, present mode will blink on the display,
use the UP/DOWN button to select No or Yes, press the ENTER button to store. Press the MENU
button back to the last menu or let the unit idle 30 seconds to exit menu mode.
RDM FUNCTIONS
Select the MANUFACTURER menu to display the manufacturer of the fixture.
Select the SOFTWARE VERSION menu and the program version number of the fixture will be
displayed.
Select the DMX START ADDRESS menu to change the DMX 512 address (001-512).
Select the DEVICE MODEL DESCRIPTION menu to display the model of the fixture.
Select the DEVICE LABEL menu to change the model of the fixture.
Select the DMX PERSONALITY menu to set the channel mode of the fixture (5/7/9 channel).
Select the DMX PERSONALITY DESCRIPTION menu to display the current channel mode of the
fixture.
Select the DEVICE HOURS menu to display the running time of the fixture.
Select the RESET DEVICE menu, the WARM RESET/COLD RESET option will be displayed. When
WARM RESET is selected, the fixture will start a warm reset, and exit when COLD RESET is selected.
4. How To Control The Unit
You can operate the unit in two ways:
1. By primary/secondary built-in preprogram function
2. By DMX controller
13G