7. Power Switch (Wire Version):
Turn on/off the power
8. Power Cable (Wire Version):
Used to connect to supply power
9. Fuse (T 6.3A):
To protect the unit from over-voltage or short circuit
10. MAINS IN (POWERCON Version):
Used to connect to the main power supply
11. MAINS OUT (POWERCON Version):
Used to connect to the next unit
3.2 Main Function
To select any of the given functions, press the
MENU
button until the required function is showing
on the display. Select the function by pressing the
ENTER
button and the display will blink. Use the
DOWN
/
UP
buttons to change the mode. Once the required mode has been selected, press the
ENTER
button to setup. To go back to the functions without any change, press the
MENU
button
again or wait for one minute to exit the menu mode.
The main functions are shown overleaf:
6G