3. How To Set The Unit
3.1 Control Panel
Wire Version
：
POWERCON Version
：
10 11
1. Display:
To show the various menus and the selected functions
2. Button:
MENU
To select the programming functions
DOWN
To go forward in the selected functions
UP
To go backward in the selected functions
ENTER
To confirm the selected functions
LED:
3. POWER
ON
Power On
4. DMX
ON
DMX input present
5. DMX IN:
DMX512 link, use 3-pin/5-pin XLR cable to link the unit and DMX controller
6. DMX OUT:
DMX512 link, use 3-pin/5-pin XLR cable to link the next unit
5G