6C
SD Functions
Press the knob when the
SD Functions
show on the display, use the knob to select
SD Mode, SD File
or
Exit.
Enter
SD Mode,
use the knob to select ILD Show, PRG Show or No SD, press the knob to confirm.
Enter
SD File,
select the file or folder, press the knob to confirm. Press
EXIT
to back to the menu.
Figure Functions
Press the knob when the
Figure Functions
show on the display, use the knob to select
Size, Phase Set
or
Exit.
Enter
Size
, use the knob to select figure size from 10 to 100, press the knob to confirm. Enter
Phase
Set
, set the positon of the figure. Press
EXIT
to back to the menu.
Fixture Functions
Press the knob when the
Fixture Functions
show on the display, use the knob to select
Back Lights,
Fixture Hours, Defaults, Version
or
Exit.
Enter
Back lights
, use the knob to select on or off, press the
knob to confirm. Enter
Fixture Hours
, the running time of the unit will be show on the display. Enter
Defaults,
use the knob to select Yes or no to restore factory settings or not. Enter
Version,
the version of
the software will be show on the display. Press
EXIT
to back to the menu.
5. How to Control the Unit
1. By ILDA;
Connect the unit to the computer with ILDA wire and control the software by computer laser;
Priority to control the unit: ILDA
﹥
DMX
﹥
Sound active
﹥
Auto play
2. By universal DMX controller;
Set the DMX address, the unit will be ready to receive DMX signal.
3. Sound active;
The unit will run show by the sound active.
4. Auto play;
The unit will auto play when no signal.
6. DMX512 Configuration
DMX Channel:
Содержание LS-1005
Страница 1: ...LS 1005 RGB ...