Add color filter (option) to the Pin Spot for different color
performance.
The LED Pin Spot can be used as a table light with 11 lens.
Beam angle: 6 (standard) or 11 (accessory)
Power Supply: 100~240V, 50/60Hz
LED: 1 x 3W white, 50,000hrs rated
Size: 104 x 74 x 78 mm
Weight: 0.35kg
1. Before your initial start-up, please unpack and carefully check
if there is any damage caused during transportation.
2. Locate a suitable place for your device where there is good air
flow.
3. Check the surroundings and make sure there is no flammable
materials close to the unit as it can become very hot.
4. The machine should be kept away from moisture.
5 .When replacing parts, please use only genuine spare parts.
6. Be sure the lid is tightly closed during operation.
7. Do not connect the device to any dimmer pack.
8. Always remember to unplug the unit from the power mains
before any service is done. There are no user serviceable
parts inside. Service should be done by qualified personnel
only.
9. Do not touch any wires during operation.
Cautions
Technical Specification
Innovative design with powerful beam, low heat and low power
consumption, the LED Pin Spot is a perfect tool to replace the
traditional halogen pin spot.
Advanced LED technology, long life span, no need to change
the lamp.
How To Change The Lens
Lens
Fixing ring
1. Remove the fixing ring.
2. Change the lens.
3. Put back the fixing ring.
LED PIN SPOT
LED-900 A
74
78
104
55
Add color filter (option) to the Pin Spot for different color
performance.
The LED Pin Spot can be used as a table light with 11 lens.
Beam angle: 6 (standard) or 11 (accessory)
Power Supply: 100~240V, 50/60Hz
LED: 1 x 3W white, 50,000hrs rated
Size: 104 x 74 x 78 mm
Weight: 0.35kg
1. Before your initial start-up, please unpack and carefully check
if there is any damage caused during transportation.
2. Locate a suitable place for your device where there is good air
flow.
3. Check the surroundings and make sure there is no flammable
materials close to the unit as it can become very hot.
4. The machine should be kept away from moisture.
5 .When replacing parts, please use only genuine spare parts.
6. Be sure the lid is tightly closed during operation.
7. Do not connect the device to any dimmer pack.
8. Always remember to unplug the unit from the power mains
before any service is done. There are no user serviceable
parts inside. Service should be done by qualified personnel
only.
9. Do not touch any wires during operation.
Cautions
Technical Specification
Innovative design with powerful beam, low heat and low power
consumption, the LED Pin Spot is a perfect tool to replace the
traditional halogen pin spot.
Advanced LED technology, long life span, no need to change
the lamp.
How To Change The Lens
Lens
Fixing ring
1. Remove the fixing ring.
2. Change the lens.
3. Put back the fixing ring.
LED PIN SPOT
LED-900 A
74
78
104
55
LED-900 A1
LED-900 A1