ACME LED-212RGB, Руководство пользователя

Страница: 3 / 9

4A
4. How To Set The Unit
4.1 Control Panel
○
1 Display: To show the various menus and the selected functions
LED:
○
2 DMX On DMX input present
○
3 MASTER On Master Mode
○
4 SLAVE
On Slave Mode
○
5 SOUND
Flashing Sound activation
Button:
○
6 MENU
To select the programming functions
○
7 DOWN
To go backward in the selected functions
○
8 UP
To go forward in the selected functions
○
9 ENTER To confirm the selected functions
○
10 Microphone
：
： ：
：
Receive music for the sound active.
○
11 Only for remote control
：
： ：
：
By connect to the 1/4’’ microphone jack to control the unit for
Stand by, Function and Mode function.
○
12 DMX output
：
： ：
：
For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
5A
○
13 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.
○
14 Mains input
： ： ： ：
Connect to supply mains power.
○
15 Mains output
： ： ： ：
Connect to supply mains power for the next unit.
4.2 Main Function
To select any of the given functions, press the MENU button up to the required one is shown
on the display. Select the function by ENTER button and the display will blink. Use DOWN
and UP button to change the mode. Once the required mode has been selected, press the
ENTER button to setup or it will automatically return to the main functions without any
change after idling 8 seconds. To go back to the functions without any change press the
MENU button. The main functions are shown below: