ACME Building wash, Руководство пользователя

Страница: 3 / 20

1. Safety Instruction

Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
Caution:

All fixtures are intact from the manufacturer, please operate follow up the user manual,
artificial fault are not under guarantee repair.

Unpack and check carefully there is no transportation damage before using the unit.

DO install and operate by operator.

Use safety chain when fixes the unit.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces.

Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Maximum ambient temperature Ta: 40
℃
. Don’t operate it where the temperature is higher
than this.

DO NOT connect the device to any dimmer pack.

Make sure there are no flammable materials close to the unit while operating, as it is fire
hazard.

Look over power wires carefully, replace immediately if there is any damage.

Unit surface temperature may reach up to 60
℃
. DO NOT touch the housing bare-hand during
its operation.

Avoid any inflammable liquids, water or metal objects entering the unit. Once it happen, cut
off the mains power immediately.

DO NOT operate in dirty and dusty environment, also cleaning fixtures regularly.

DO NOT allow children to operate the fixture.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid power wires together arounding other cables.
Please read the instructions carefully which includes important
information about the installation, operation and maintenance.
2E