Quick Start Guide
2019/09
Documentation and Support
For the full set of FreeShape 120 documentation, go to:
https://ackuretta.com/support-center/freeshape120
For community feedback, see our Ackuretta’s User Group on Facebook:
https://www.facebook.com/groups/2164055477166718/
www.ackuretta.com
Setting Up Wi-Fi
You can easily operate your FreeShape 120 from your computer. You can upload prints
directly, and track print status. To set up your Wi-Fi connection:
1.
Go to
Network
.
2.
Select
Wi-Fi
.
3.
Turn
Wi-Fi Connection
to
“ON”
.
4.
Select your Wi-Fi network.
5.
An IP address will appear. Key the IP address
into a browser on your computer.
Wi-Fi setup video:
https://youtu.be/6UzuHPnGYnI
Updating Firmware
Ackuretta is always adding new resins and improving functionality. If you are connected to
the Internet, check for the latest firmware:
1.
Go to
Settings
.
2.
Select
Update
.
3.
Press
Update firmware online
.
Update firmware video:
https://youtu.be/C3ThWRO56vk
You can print either over Wi-Fi or from your USB device.
1.
Go to
.
2.
Choose USB or Computer, depending on your
location of your file.
3.
Choose your IBF file.
4.
Change your material setting, if necessary.
5.
Press
.
Print video:
https://youtu.be/3iRLnvvCwck