84
6
At the end
Function
Code
Configuration
Auth.
Default
Call forwarding in central office:
p: So-Port (1 ..2/3/4)
M
if line busy (CFB)
#62 p(m)adrrr..#
m: MSN-Index (0..9)
after a time period (CFNR)
#63 p(m)adrrr..#
d: service
permanent (CFU)
#61 p(m)adrrr..#
0=Standard 1=Telephony
2=Fax 3=3,1kHz Audio
4=unidirect. 5=all
rrr: destination call no.
Follow me
#*65 nn#
nn: subscriber on
M,C,S
Follow me
#*66 nn#
nn: subscriber off
M,C,S
Call forwarding switch on-/off
#*60 u-0/1#
u: call forwarding
M
off
0=All 1=CFU
2=CFB 3=CFNR
0: Off 1: On
call forwarding
if line busy (CFB)
#*62 nn/rrr...#
nn: internal destination call no.
M,C,S
off
no reply (CFNR)
#*63 ttt nn/rrr...#
rrr: external destination call no.
unconditional (CFU)
#*61 nn/rrr...#
ttt:
time in seconds (001 ...120)
Call forwarding unconditional
1 nnpp... * IP
nn: subscr. call no.
(CFU) switched from remote
pp: subscriber PIN
IP: internal procedure #*61 ....
Switching on DIS call diversion
#*439 pnn/rr...#
p: DIS port (1/2)
M
Switching off DIS call diversion
#*439 p#
nn: internal destination call no.
rr:
external destination call no.
Activation partial rerouting (CFPR)
#*89 -0/1#
0: Off 1: On
M,C,S
off
Call forwarding
Look up