33
3
Mehr als nur
T
elefonieren
3
More than only
telephone calls
ISDN call forwarding “unconditional”, “on busy”, “no reply”
You want to forward
external calls to an external telephone. If you operate the
EURACOM on a PABX connection, all calls for the
PABX telephone number will be
forwarded; it is not possible to program call forwarding for a special extension. On a
multiple subscriber connection it is possible to program call forwarding specific for
each of your multiple subscriber numbers.
You have the choice between three different modes of call forwarding:
•
Unconditional (the call will always be forwarded).
•
If your extension is engaged.
•
If no one replies after a certain time period (4 - 5 times ringing).
You must have applied for call forwarding at your
network provider.
In case of ISDN telephones it is only possible to program ISDN call forwarding, if #
and * appear in the display after pressing the keys.
Analogue telephones must be
able of dialling with
tone dialling (dual tone multiple frequency mode).
Switching on call forwarding in case of PABX connection
Please first read the description next to the keys.
+
#6
eg
1
Mode of call forwarding
1
Call forwarding “unconditional”
2
Call forwarding “on busy”
3
Call forwarding “no reply”
eg
1
1,2,3 or 4: number of the basic access, the PABX
telephone number belongs to. If you have only one
basic access, you then enter 1. In case of two basic
accesses read the configuration via PC (ISDN
ports) or consult your distributor.
eg
0
Service identifier: describes, which service is to
be forwarded.
Example: if you want to forward your calls, but
receive ISDN data and fax (group 2 / 3) still on
your extension, enter a 0. In case of forwarding
all, enter a 9.
0
Analogue and ISDN call
NOTE: analogue fax can be forwarded too.
1
ISDN calls
2
Fax, group 2 / 3
3
Analogue calls
4
ISDN data for your PC
9
All services
↓
Being obtainable everywhere: call forwarding