31
3
Mehr als nur
T
elefonieren
3
More than only
telephone calls
Call diversion “no reply”
You would like to forward calls to an
internal or external telephone, in case after a
certain time there is no reply on your extension. In case of
ISDN telephones this is
also possible via the menu of the telephone (--> manual of the telephone). Call diver-
sions for door phones see page 39.
Applying for internal telephones:
The telephone you want to divert to, is not allowed to have a call protection.
If the telephone is engaged, the call will still be indicated on your telephone.
If the telephone you want to divert to has also been programmed for call diversion
on “no reply”, your calls will be diverted to the new destination (diversion chain).
If you want to divert external calls, the telephone you want to divert to, must have
an external authorization (-->“Configuration”, page 48). If not, you may switch on
call diversion however, but the call nevertheless will not be diverted.
1) Determine destination for call diversion “no reply”
An existing call diversion “no reply” will be substituted by the new diversion.
+
#*63
eg
008
Time period between 001 and 120 seconds, after
that the call shall be diverted.
number
The telephone number to be diverted to. In case
of external telephone numbers without 0 for
connection to external line.
#
-
You have now programmed the destination of the
call diversion.
Now you only have to switch on call diversion.
2) Switch on call diversion “no reply”
+
#*6031#
-
You have now switched on call diversion. If you lift
the receiver the next time, you hear the special
dialling tone, internal (not with
automatic
connection to external line)
Switching off call diversion “no reply”
The destination of the call diversion remains stored.
+
#*6030#
-
You have now switched off call diversion. If you
want to divert to the same destination later, you
only have to switch on call diversion again.
Being obtainable everywhere: call diversions
