29
3
Mehr als nur
T
elefonieren
3
More than only
telephone calls
Call diversion “on busy”
You would like to forward calls to an
internal or external telephone in case your
connection is engaged. In case of
ISDN telephones this is also possible via the
menu of the telephone (--> manual of the telephone). Call diversions for door pho-
nes see page 39.
Applying for internal telephones:
The telephone you want to divert to, is not allowed to have a call protection.
If the telephone you want to divert to, has also been programmed for call diversion,
your calls nevertheless will be diverted to this telephone.
If you want to divert external calls, the telephone you want to divert to, must have
an external authorization (--> “Configuration”, page 48). If not, you may switch on
call diversion however, but the call nevertheless will not be diverted.
If the caller shall not signal call waiting first but rather be diverted immediately, you
must have switched on call waiting protection (--> page 52).
1) Determine destination for call diversion “on busy”
An existing call diversion “on busy” will be substituted by the new diversion.
+
#*62
number
The telephone number to be diverted to. In
case of external telephone numbers
without 0 for
connection to external line.
#
-
You have now programmed the destination
of the call diversion.
Now you only have to switch on call diversion.
2) Switch on call diversion “on busy”
+
#*6021#
-
You have now switched on call diversion. If
you lift the receiver the next time, you hear
the special dialling tone, internal (not with
automatic connection to external line)
Switching off call diversion “on busy”
The destination of the call diversion remains stored.
+
#*6020#
-
You have now switched off call diversion.
If you want to divert to the same destination
later, you only have to switch on call diversion
again.
Being obtainable erverywhere: call diversions