ACIQ SC-09WGLD-HP230 Скачать руководство пользователя страница 31

ACiQ Limited Warranty Conditions

The ACiQ Limit Warranty only applies if the following conditions are met:

    1. To obtain the extended warranty periods for residential applications, the product must be registered online or by mailing the
         completed Warranty Certificate to ACiQ within 90 days of original equipment installation. In jurisdictions where warranty
         benefits conditioned on registration are prohibited by law, registration is not required and the extended warranty period will
         beapplied if it is for a residential application.
    2.  If the original installation date is not verifiable, then the Limited Warranty period begins 90 days after the product
         manufacturing date. This will be determined by the model and serial number of each product.
    3.  For subsequent owners of the equipment, the length of the Limited Warranty shown in Figure 1 for subsequent owners will
         be upheld without the need for further product registration.
    4.  For non-residential applications of the equipment, the length of the Limited Warranty shown in Figure 1 for non-residential
         applications will be upheld without the need for further product registration.
    5.  The equipment must be part of an ACiQ-certified system pairing and every system must be operated in complete structures.
    6.  The entire system must be installed, serviced, and diagnosed by a factory-authorized, EPA-certified contractor and the
          installation must be in compliance to your state and local installation codes. Any warranty work must also be fulfilled by a
          licensed dealer or contractor. Installations must follow all ACiQ installation guidelines as specified in each product's
          designated ACiQ installation manuals. Failure to follow these guidelines and installation codes may result in any warranty
          remaining unfulfilled, the installation may fail any potential building inspection that the equipment may be subject to, or
          improper installation may endanger the equipment or occupants of the dwelling where the equipment is installed.
    7.  All ACiQ equipment must be operated following the equipment's designated owner's manual and cannot be misused.
    8.  All ACiQ equipment must have an intact faceplate with its specifications, model number, and serial number still legible. If the
         equipment is not in this condition, both the standard and extended warranties are void.
    9.  Upon request, ACiQ reserves the right to request subsequent information such as service and maintenance records of all
         equipment on the warrantied system, including but not limited to proof of a minimum of a once-a-year maintenance plan.
 10.  Warranties will only be applicable to products installed at their original installation location and reinstalled equipment will
         not be covered by any warranty at the discretion of ACiQ.
 11.  Defective parts must be returned to ACiQ through a servicing dealer or contractor to receive a reimbursement (if applicable).
 12.  ACiQ electric heater accessories installed in residential applications hold a 5 year limited warranty from their installation date.
 13.  ACiQ products must be installed in the United States for the Limited Warranty to be upheld.
 14.  ACiQ is not responsible for any delay or extended lead time for parts for any reason whatsoever.
 15.  All implied warranties of merchantability and fitness for a particular use or purpose are limited in duration to the period for
         which the Limited Warranty is specified except in jurisdictions where limitations on implied warranties are prohibited.

This Warranty Does Not Cover

   1. Any labor or other costs incurred for the diagnosis, handling, installation, operation, removal, repair, service, or shipping of
        failed parts, replacement parts, or new units. Refrigerant or any costs related to refrigerant will not be supplied.
   2. Any product installed in violation to any and all applicable governmental minimum efficiency standards.
   3. Standard maintenance not covered under this Limited Warranty designed to cover only parts and compressors.
   4. Damage, labor, parts, or repairs required as a consequence of improper shipping and handling, improper installation, improper
        operation, improper servicing, misapplication, misuse, and/or unauthorized alteration.
   5. Damages due to electrical conditions outside of the equipment including but not limited to improper voltage conditions, blown
        fuses, open circuit breakers, or interruption of any electrical or other service required for use.
   6. Damages resulting from flooding, wind, fire, lightning, accidents, corrosive environments, rust, general wear, or other
        conditions beyond the control of ACiQ. This also includes any damages as a result of any third-party, non-ACiQ approved parts.
   7. Any refrigerant needed for installation, warranty, or any other process related to any ACiQ product.
   8. Any labor, lodging, transportation, electricity, or any fuel costs associated with any equipment for any reason whatsoever.
   9. Any special or indirect commercial damage of any kind, unless your jurisdiction does not allow this exclusion.

2331 West State Route 55

Troy, Ohio 45373

Содержание SC-09WGLD-HP230

































Отзывы: