aci Workstation COMFORT Скачать руководство пользователя страница 15

Страница: 15 / 80

Safety

Operation

•

The workstation may only be operated by trained personnel.
It is advisable to log both the initial training as well as the regular refresher courses.

•

The device may only be operated when connected to an alternating voltage supply cor-
responding to the specifications on the type plate.

•

The effectiveness of the protective conductor must be regularly checked and confirmed
by an authorized skilled worker.

•

If a defect occurs in the workstation, it must be disconnected from the power supply
system and secured against being switched on again.

Maintenance/care

•

Maintenance and repair work on the workstation may only be performed by the manu-
facturer.

•

Disconnect the device from the power supply before starting cleaning and care tasks.

•

Do not touch the electrical/electronic components.

Содержание Workstation COMFORT

















































































Результаты поиска

Содержание Workstation COMFORT

Отзывы:

Похожие инструкции для Workstation COMFORT

Бренды по названию

Популярные бренды

aci Workstation COMFORT, Руководство по эксплуатации

Результаты поиска

Содержание Workstation COMFORT

Отзывы:

Похожие инструкции для Workstation COMFORT

Бренды по названию

Популярные бренды