ACI Hoist & Crane MLH-005 страница 4 Скачать руководство пользователя

Страница: 4 / 16

Lever Hoists

PAGE: 4

Model MLH

MLH-005 & MLH-010

2.0 SAFETY PRECAUTIONS

2.1 Safety Alert Symbols

Throughout this manual are steps and procedures that can prevent hazardous situations, the following symbols are used to identify

the degree or level of hazard seriousness.

DANGER, WARNING AND CAUTION NOTICE

Symbol

Description

Danger

Indicates an imminently hazardous situation which, if not

avoided,

will result in death or serious injury

and property

damage.

Warning

Indicates an imminently hazardous situation which, if not

avoided,

could result in death or serious injury

and property

damage.

Caution

Indicates a potentially hazardous situation which, if not

avoided,

may result in minor or moderate injury

or property

damage.

Notice

Notifies people of installation, operation or maintenance

information which is important but not directly hazard related.

Failure to read and comply with any of the limitations noted in this manual can result in serious bodily injury or

death, and/or property damage.

Содержание MLH-005
















Результаты поиска

Содержание MLH-005

Отзывы:

Похожие инструкции для MLH-005

Бренды по названию

Популярные бренды

ACI Hoist & Crane MLH-005, Руководство по эксплуатации

Результаты поиска

Содержание MLH-005

Отзывы:

Похожие инструкции для MLH-005

Бренды по названию

Популярные бренды