English 29
USING THE PROJECTOR
Display menu
Display image settings menu
otee:
Functions vary depending on model definition.
Display Mode
There are many factory presets optimized for various types of images.
Presentation
: This mode is suitable for showing in front of public in connection to the PC.
Bright
: Maximum brightness from PC input.
HDR/HLG SIM.
: Decodes and displays High Dynamic Range (HDR) and Hybrid Log Gamma(HLG)
content for the deepest blacks, brightest whites, and vivid cinematic color.
Cinema
: Provides the best colors for watching movies.
Football
: For football performance
User
: Memorize user’s settings.
3D
: To experience the 3D effect, you need to have 3D glasses, make sure your PC/portable device
has a 120 Hz signal output quad buffered graphics card and have a 3D Player installed.
Brightness
Adjust the brightness of the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture.
Sharpness
Adjust the sharpness of the image.
Color
Adjust a video image from black and white to fully saturated color.
otee:
This menu option is only available if the input source is other than RGB.
Tint
Adjust the color balance of red and green.
otee:
This menu option is only available if the input source is other than RGB.
Gamma
Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
Film
: For home theater.
Video
: For video or TV source.
Graphics
: For PC / Photo source.
Standard(2.2)
: For standardized setting.
otee:
These options are only available if the 3D mode function is disabled, the
Wall Color
setting is not set
to
Blackboard
, and the
Display Mode
setting is not set to
DICOM SIM.
,
HDR SIM.
or
HLG SIM.
In 3D mode, user can only select
3D
for
Gamma
setting.
If the
Wall Color
setting is set to
Blackboard
, user can only select
Blackboard
for
Gamma
setting.
