Acer Veriton 9100, Руководство по обслуживанию

Страница: 32 / 96

23 Chapter 2
Entering Setup
To enter Setup, press the key combination Ctrl-Alt-Esc during the POST (Power-on self-test).
NOTE: You must press Ctrl-Alt-Esc simultaneously while the system is booting.
The Setup Utility main menu then appears:
The above screen is the BIOS Utility Basic Level screen. It allows you to view and change only the basic
configuration of your system.
The command line at the bottom of the menu tells you how to move within a screen and from one screen to
another.
!
To select an option, move the highlight bar by pressing or then press .
!
Press to move to the next page or to return to the previous page.
!
To change a parameter setting, press or until the desired setting is found.
!
Press to return to the main menu. If you are already in the main menu, press again to
exit Setup.
The parameters on the screens show default values. These values may not be the same as those in your
system.
The grayed items on the screens have fixed settings and are not user-configurable.