BIOS Setup
A26361-K522-Z122-3-7419
English - 31
Reset Resource Assignments
This field specifies whether the configuration data is reset and reinitialized when the system is
started.
Yes
After the system is started, the configuration data is reset, and the entry in this field
is set to
No
. The new configuration data is determined by means of the Plug&Play
functionality. The mounted boards and drives are then initialized with this data. Non-
Plug&Play components must be entered manually.(e. g. in Windows 95, ICU).
No
After the system is started, the Plug&Play functionality ascertains the current
configuration data and uses this data to initialize the installed boards and drives. The
configuration data of non-Plug&Play components are not reset.
Load Default Settings
You need to reload the BIOS default settings every time you make changes to your system
hardware configuration (such as memory size, CPU type, hard disk type, etc.); otherwise, BIOS will
keep the previous settings.
After selecting
Load Default Settings
the following dialog box appears:
Do you want to load default settings?
Yes
No
Selecting
Yes
enables BIOS to detect the new default values. Selecting
No
returns you to the main
menu without loading the default settings.
Abort Settings Change
After selecting
Abort Settings Change
the following dialog box appears:
Do you want to abort settings change?
Yes
No
Select
Yes
to discard all changes. Selecting
No
returns you to the main menu and the changes
remain effective.
Exiting Setup
To exit
BIOS Setup
press the
[Esc]
[Esc]
[Esc]
[Esc]
key in the main menu. Confirm the following dialog box.
