background image

iii

Notices

FCC Notice

This device has been tested and found to comply with the limits for a Class B 
digital device pursuant to Part 15 of the FCC Rules.  These limits are designed 
to provide reasonable protection against harmful interference in a residential 
installation.  This device generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 
installation.  If this device does cause harmful interference to radio or television 
reception, which can be determined by turning the device off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures:

Reorient or relocate the receiving antenna

Increase the separation between the device and receiver

Connect the device into an outlet on a circuit different from that to 
which the receiver is connected

Consult the dealer or an experienced radio/television technician for help

Notice:  Shield Cables

All connections to other computing devices must be made using shielded cables 
to maintain compliance with FCC regulations.

Notice:  Peripheral Devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to 
comply with the Class B limits may be attached to this equipment.  Operation 
with non certified peripherals is likely to result in interference to radio and TV 
reception.

Caution

Changes or modifications not expressly approved by the manufacturer could 
void the user’s authority, which is granted by the Federal Communications 
Commission, to operate this computer.

Wbt.book  Page iii  Monday, August 2, 1999  4:07 PM

Содержание Ultra Distortion UD300























































Отзывы: