English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1 To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.
•
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
•
2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this
range may result in permanent damage.
6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
Monitor-to-PC signal cable is frayed or damaged.
•
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
•
The LCD monitor or case is damaged.
•
Package contents
LCD monitor
AC Power cable DVI cable
(Optional)
VGA cable
HDMI cable
(Optional)
AC Adapter
User guide
Quick start
guide
Attaching the monitor to the base
1 Remove the monitor base from the packaging and place it on a stable and level workspace.
2 Remove the monitor from the packaging.
3 Attach the monitor stand arm to the base.
Ensure that the base is locked onto the monitor stand arm. (for selected models)
•
Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin. (for
•
selected models)
Connecting your monitor to a computer
1 Turn off your computer and unplug your computer’s power cord.
2 Connect the signal cable to the VGA and/or DVI-D (optional) and/or
HDMI (optional) input socket of the monitor, and the VGA and/or DVI-D
(optional) and/or HDMI (optional) output socket of the graphics card
on the computer. Then tighten the thumbscrews on the signal cable
connector.
3 Connect one end of the adapter to the monitor and the other end to a
properly grounded, AC outlet.
4 Plug the power cords of your computer and your monitor into a nearby
electrical outlet.
Panel controls
No.
Item
Description
1
Power button /
indicator
Turns the monitor on/off. Blue indicates power
on. Blinking blue indicates standby / power
saving mode.
2
<
/
>
button
Press the
<
/
>
button to navigate to the desired
function or to change the settings of the current
function.
3
Menu / Enter
button
Press to view the OSD menu. Press it again to
enter a selection in the OSD menu.
4
Auto / Exit
button
When the OSD menu is active, press this
•
button to exit the OSD menu.
When the OSD menu is inactive, press
•
this button to activate the Auto Adjustment
function.
5
Empowering
Key
Press this button to open the Acer eColor
Management OSD and access the scenario modes.
DC-IN
D-SUB
1
2
3
4
5
