7
English
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1 Connect the digital cable
a. DVI Cable (Optional, only Dual-Input Model)
(1) Make sure both the monitor and computer are powered-OFF.
(2) Connect the DVI (Dual Link) cable to the computer.
b. HDMI Cable (Optional, only HDMI-Input Model)
(1) Make sure both the monitor and computer are powered-OFF.
(2) Connect the HDMI cable to the computer.
c. DP Cable (Optional, only DP-Input Model)
(1) Make sure both the monitor and computer are powered-OFF.
(2) Connect the DP cable to the computer.
d. Connect the audio cable (Optional, only Audio-input Model).
2 Connect the adapter
a. Connect the AC cord to the adapter.
b. Connect one end of the adapter to the monitor and the other end to a
properly grounded, AC outlet.
3 Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very important.
4 If the monitor does not function properly, please refer to the troubleshooting section
to diagnose the problem.
HDMI
DVI-IN
DP
AUDIO IN
HDMI
HDMI
DP
DVI-IN
HDMI
DC IN
Note:
Audio output is only for audio output model.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Содержание RC241YU
Страница 1: ...Acer LCD Monitor User Guide ...
