1 Upgrading your computer - 29
Installing a memory module
1. Select an empty DIMM slot.
2. Remove the new memory module from its packaging, handling it by
the edges.
3. Align then insert the memory module into the DIMM slot (
1
).
4. Push the module to the slot until the retaining clips snap inward (
2
).
The module is keyed so it can only be inserted in one direction. If the
module does not fit, make sure that the notch in the module lines up
with the tab in the memory slot.
5. Repeat steps 1~4 to install the other memory modules.
Note
DIMM slots on the mainboard must be installed only in certain configurations.
Numbers next to DIMM slots correspond to installation sequence.
Be sure to install the memory module in DIMM1 slot followed by DIMM2 slot.
Содержание Predator G6-720
Страница 1: ... 1 Predator G6 720 User s Guide ...
Страница 13: ...1 Upgrading your computer 13 6 Pull both sides of the HDD carrier 1 then remove the hard drive 2 ...
Страница 20: ...20 1 Upgrading your computer 10 Remove the hard drives from the bracket ...
Страница 38: ...38 1 Upgrading your computer 4 Detach the SSD module from the mainboard ...