background image

1

... English

Table of Contents

Table of Contents ....................................................................................... 1

Usage Notice .............................................................................................. 2

Precautions ......................................................................................................... 2

Introduction ................................................................................................ 4

Product Features ................................................................................................ 4

Package Overview ............................................................................................. 5

Product Overview ................................................................................................ 6

Main Unit ........................................................................................................................ 6

Control Panel ................................................................................................................. 7

Connection Ports .......................................................................................................... 8

Remote Control with Laser Pointer .............................................................................. 9

Installation ............................................................................................... 10

Connecting the Projector .................................................................................. 10

Powering On/Off the Projector .......................................................................... 11

Powering On the Projector ......................................................................................... 11

Powering Off the projector .......................................................................................... 12

Warning Indicator ....................................................................................................... 12

Adjusting the Projected Image ......................................................................... 13

Adjusting the Projector Image Height ........................................................................ 13

Adjusting the Projector Zoom / Focus ....................................................................... 14

Adjusting Projected Image Size ................................................................................. 14

User Controls ............................................................................................ 15

Control Panel & Remote Control ...................................................................... 15

On-Screen Display Menus ............................................................................... 17

How to operate ............................................................................................................ 17

Language (Computer/Video Mode) ............................................................................ 18

Color (Computer/Video Mode) ................................................................................... 19

Image (Computer/Video Mode) .................................................................................. 21

Audio (Computer/Video Mode) ................................................................................... 23

Management (Computer/Video Mode) ....................................................................... 24

Appendices .............................................................................................. 27

Troubleshooting ............................................................................................... 27

Replacing the lamp .......................................................................................... 31

Specifications ................................................................................................... 32

Compatibility Modes ........................................................................................ 33

Ceiling Mount Installation ................................................................................. 34

Содержание PD523 Series



































Отзывы: