23
Eng
lis
h
Source
Setting
Source Selection
Manual by source menu, Auto by Smart Detection.
HDMI Color Range
Adjust the color range of the HDMI image data to correct color
display error.
•
Auto: Automatically adjust by information from player.
•
Limited Range: Prosess the input image as limited color range
data.
•
Full Range: Prosess the input image as full color range data.
Language
Choose the multilingual OSD menu. Use the
/
/
/
key to select your preferred menu language.
•
Press "ENTER" to confirm the selection.
Projection Mode
•
Front: The factory default setting.
•
Rear: When you select this function, the projector
reverses the image so you can project from behind a
translucent screen.
•
Rear: When you select this function, the
projector reverses and inverts the image at same time. You
can project from behind a translucent screen with ceiling
mounted projection.
•
Front: When you select this function, the
projector inverts the image for ceiling-mounted projection.
Menu Settings
Menu Display Time
Choose the OSD menu display time. (Default is 20 seconds). Select
"Manual" to turn off main menu/one direct-key menu manually by
user.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets whether to display the reminder message.
Operation Settings
AC Power On
Choose "On" to power on projector while AC power plug in.
Auto Shutdown
The projector will automatically shutdown when there is no signal
input after the allocated time. (default is 15 minutes)
Quick Cooling
Choose "On" to turn off the projector in a few seconds.
Control Panel Lock
Disables or enables all panel key functions except Power on the
projector.
Background
Allows you to select which background color will display when no
signal is input into the projector.
