background image

43

Eng

lish

Eng

lis

h

Remarque à l'intention des utilisateurs canadiens

Cet appareil numérique de la classe B est conforme a la norme NMB-003 du 
Canada.

Canada — Low-power license-exempt radio

communication devices (RSS-210)

a

Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference 
that may cause undesired operation of the device.

b

Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is 
intended to be operated indoors and installation outdoors is subject 
to licensing.

Declaration of Conformity for EU countries

Acer hereby declares that this projector series is in compliance with the essential 
requirements and other relevant provisions of Directive 1999/5/EC. (Please visit 
http://global.acer.com/support/certificate.htm for complete documents.)
Compliant with Russian regulatory certification

 Radio device regulatory notice

Note: The regulatory information below is for models with 
wireless LAN and/or Bluetooth only.

General

This product complies with the radio frequency and safety standards of any 
country or region in which it has been approved for wireless use. Depending on 
configurations, this product may or may not contain wireless radio devices (such 
as wireless LAN and/or Bluetooth modules). The below information is for 
products with such devices.

Содержание P1266n Series



























































Отзывы: