manualshive.com logo in svg

Acer NITRO VG2 VG252QS, Руководство пользователя, Страница: 26 / 32

Поделиться
Скачать
Acer NITRO VG2 VG252QS Скачать руководство пользователя страница 26

EN-16

8.

Ultra-Low Latency: Select On to speed up the processing time of the 
display switching process.

9.

Aim Point: Show an Aim point on the screen for shooting games.

Adjusting the OSD

1.

Press the MENU key to open the OSD.

2.

Using the Navi/OK button, select OSD from the OSD. Then navigate to the 
setting you wish to adjust.

3.

Use the Navi/OK button to adjust any sliding scales.

4.

Language: Set the OSD menu language.

5.

OSD Timeout: Adjust the delay before turning the off the OSD menu.

6.

Transparency: Select the transparency when using gaming mode. The 
transparency can be 0% (OFF), 20%, 40%, 60%, or 80%.

7.

OSD Lock: OSD Lock function is used to prevent OSD button from being 
pressed accidentally. To remove the OSD Lock message, press and hold 
the Navi/OK button continuously for 3 seconds until the message 
disappears. If the OSD Lock message remains, please check whether the 
Navi/OK button is stuck.

Note: 
 1. If FreeSync Premium is “ON”, then the Ultra-Low Latency is 

automatically turned On and grayed out.

 2. Ultra-Low Latency is not supported at resolutions below 800 x 

600.

Содержание NITRO VG2 VG252QS

































Отзывы:

Нет отзывов