25
English
OSD Messages
#
Condition
Message Reminder
1
Message
•
Fan Fail - the system fan is not working.
•
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed
to cool down before it may be used. Please check the
following message.
Please also check the dust filters if they are installed. If the
dust filter is clogged with dust, please clean it.
•
Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
Warning
FAN LOCKED
The projector will switch off automatically
Please contact a service center for repair.
Warning
TEMPERATURE TOO HIGH
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 45 degree C.
If the problem persists in spite of the above.
Please contact a service center for repair.
Warning
Lamp Warning
Lamp life exceeded.