Use a Hex-head screwdriver unscrewed 4 screws to
release the DVI and D-SUB connectors
(No1~4Hex Nut screws
Size=M3x8;Torque=4~6KGFxCM).
Hold one side of down side that had been
separated from front bezel
Use properly force to pull up front bezel
Unhook the power key board from front bezel,
disconnect the power key cable.
Use a Phillips-head screwdriver unscrewed the
No.1~2 screws(No1~2 screw size=M2x3.3;
Torque=1~1.5 KGFxCM).
Use a Phillips-head screwdriver unscrewed the
No.1~3 screws to release the power connector and
HDMI connector.
(No1~2 screw size=M3x10; No 3 screw size=M3x6
Torque=4~6 KGFxCM).
Use a Phillips-head screwdriver unscrewed the
No.1(No1screw size=M3x4; Torque=5+/-1
KGFxCM).
Unplug the USB cable and OSD key cable.
Use a Phillips-head screwdriver unscrewed the
No.1~2(No1~2screw size=M3x6; Torque=9~10
KGFxCM).
S20
S19
S18
S15
S14
S17
1
2
3
4
1
2
Tear off shield safety tape
Disconnect the OSD key cable
1
2
3
1
1
2
1
2
3
21
Go to cover page
ACER H233H
4. Assembly and Disassembly Procedures (continued)
