Acer GOM Series, Руководство пользователя

Страница: 29 / 39

ACER Being Communication Inc.
5. Check the network status of 4G
Enter:
Network -> 4G/LTE
When deploying gateway, the network should be stable, and if there is no wired network,
we can also use 4G network, but we should choose a position with strong 4G signal to
deploy gateway.
Qualified LTE network should meet the following 2 points:
1
）
Network mode display
：
LTE
（
China Mobile: TDD, China Telecom and China
Unicom: FDD
2
）
Signal strength above 28
（
the network signal should be stable the whole day
）
As below, it’s under unqualified network:
Here, it’s under unqualified network: weak signal and it’s not 4G network.
6. Enable/disable WAN port data entry
The WAN port data entry is enabled by default and the WAN port access gateway is
supported
Access the gateway page via the WAN port IP
（
e.g. if IP of the PC is 192.168.8.x, and the
gateway is 192.168.8.5, then access on the computer through a browser, enter:
192.168.8.5, you can directly access to the gateway
）
, configuration as below(default
setting):
29