Acer G310 Altos, Руководство по обслуживанию

Страница: 30 / 113

Chapter 2 22
Introduction
Most systems are already configured by the manufacturer or the dealer. There is no need to run
Setup when starting the computer unless you get a Run Setup message.
The Setup program loads configuration values into the battery-backed nonvolatile memory called
CMOS RAM. This memory area is not part of the system RAM.
NOTE:
If you repeatedly receive Run Setup messages, the battery may be bad. In this case, the
system cannot retain configuration values in CMOS. Ask a qualified technician for assistance.
Before you run Setup, make sure that you have saved all open files. The system reboots
immediately after you exit Setup.
System Utilities
Chapter 2