4
Englis
h
Connecting the adapter and AC Power cord
•
Check first to make sure that the power cord you use is the correct type required for your
area.
•
The monitor has a universal power supply that allows operation in either 100/120 V AC or
220/240 V AC voltage area. No user-adjustment is required.
•
Plug one end of the AC power cord to the Adapter, and plug the other end into an AC
outlet.
•
For units using 120 V AC:
•
Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V.
•
For units using 220/240 V AC:
•
Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The cord set
should have the appropriate safety approvals for the country in which the equipment will
be installed.
POWER SAVING
The power saving states will be kept until a control signal has been detected or the keyboard
or mouse is activated. The recovery time from Active OFF state back to ON state is around 3
seconds.
State LED
Light
ON Blue
Power Saving
Blinking Blue
