background image

English

Taking care of your vision

Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room 

lighting, poorly focused screens, very small typefaces and low-contrast displays could stress 

your eyes. The following sections provide suggestions on how to reduce eyestrain.

Eyes
• 

Rest your eyes frequently.

• 

Give your eyes regular breaks by looking away from the monitor and focusing on a 

istant point.

• 

Blink frequently to keep your eyes from drying out.

Display

• 

Keep your display clean.

• 

Keep your head at a higher level than the top edge of the display so your eyes point 

downward when looking at the middle of the display. 

• 

Adjust the display brightness and/or contrast to a comfortable level for enhanced text 

readability and graphics clarity.

•  Eliminate glare and reflections by:

• 

placing your display in such a way that the side faces the window or any light source

• 

minimizing room light by using drapes, shades or blinds

• 

using a task light

• 

changing the display’s viewing angle

•  using a glare-reduction filter
• 

using a display visor, such as a piece of cardboard extended from the display’s top 

front edge

• 

Avoid adjusting your display to an awkward viewing angle.

• 

Avoid looking at bright light sources, such as open windows, for extended periods of 

time.

Developing good work habits

Develop the following work habits to make your computer use more relaxing and productive:

• 

Take short breaks regularly and often.

• 

Perform some stretching exercises.

• 

Breathe fresh air as often as possible.

•  Exercise regularly and maintain a healthy body.

Содержание CB282K



































Отзывы: