Acer beTouch E120, Руководство пользователя

Страница: 10 / 55

10
Installing or removing the battery
Your smartphone uses a replaceable battery to provide power. It is packed
separately from your smartphone and needs to be inserted and charged before
you can use the smartphone.
Installing the battery
2
1
Insert your fingernail into the cutout between
the battery cover and the phone. Unclip the cover
and lift off the battery cover.
Place the battery into the battery compartment,
lining up the battery connectors with those at the
bottom of the compartment.
Insert the tabs on the bottom of the battery cover
into the slots in the phone. Carefully press the top
of the cover until the clips on the side of the
cover click in place.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Charging the battery
For initial use, you need to charge your smartphone for eight hours. After that
you can recharge the battery as needed.
Connect the AC adapter cord to the micro USB connector on your smartphone.
Removing the battery
Open the battery compartment as shown in “Installing the battery“. Lift the
battery out of the compartment using the clip on the top of the battery.
Replace the battery cover as described above.