manualshive.com logo in svg

Acer B1-720, Руководство по обслуживанию

Поделиться
Скачать
Acer B1-720 Скачать руководство пользователя страница 103

FRU (Field Replaceable Unit) List

6-2

FRU (Field Replaceable Unit) List

This chapter provides the FRU (Field Replaceable Unit) listing in global configurations for the B1-
720. Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise 
Authorization).

 

NOTE:

When ordering FRU parts, check the most up-to-date information available on the regional web 
or channel. Part number changes will not be noted on the printed Service Guide. For Acer 
Authorized Service Providers, the Acer office may have a different part number code from 
those given in the FRU list of this printed Service Guide. Users MUST use the local FRU list 
provided by the regional Acer office to order FRU parts for repair and service of customer 
machines.

 

NOTE:

To scrap or to return the defective parts, users should follow local government ordinances or 
regulations on proper disposal, or follow the rules set by the regional Acer office on how to 
return the defective parts.

Содержание B1-720




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды