![background image](http://html1.mh-extra.com/html/acer/aspire-m5200/aspire-m5200_service-manual_4194097045.webp)
39
The following table describes the parameters found in this menu.
Parameter
Description
Options
ACPI Function
This item allows you to enable or disable
the ACPI function
[Enabled], [Disabled]
ACPI Suspend
Type
This item specifies the power saving modes
for ACPI function. S1 (POSP: The S1 sleep
mode is a low power state.. In this state, no
system context (SPU or chipset) is lost and
hardware maintains all system context/ S3
(STR): The S3 sleep mode is s power-down
state in which power is supplied only to
essential components such as main
memory and wake-capable devices and all
system context is saved to main memory.
The information stored in memory will be
used to restore the PC to the previous state
when an wake-up event occurs.
[S1 (POS)]: Set ACPI
suspend
type to
S1/POS
(Power On
Suspend).
[S3 (STR)]: Set ACPI
suspend
type to
S3/STR
HDD Power
Down
The setting controls how long a hard disk
drive must be left idle before it spins
downs.
[Disabled], [Standby],
[Suspend]
HDD Down In
Suspend
Enables or Disables the functionality of
HDD down in suspend
[Enabled], [Disabled]
Содержание Aspire M5200
