![background image](http://html.mh-extra.com/html/acer/aspire-l350/aspire-l350_service-manual_5943050.webp)
42
Chapter 2
PnP/PCI Configuration
Parameter
Description
Options
Reset Configuration Data
In case a conflict occurs after you assign the IRQs or
after you configure your system, you can enable this
function to allow your system to automatically reset
your configuration and reassign the IRQs, DMAs and I/
O address.
Disabled
, Enabled
Resources Controlled By
if this option is set to Auto, the BIOS automatically
selects all the devices Plug & Play compatible
specifying their Interrupt and DMA. If you selected the
manual setting, you can specify the device for each
interrupt it is assigned to (ISA o PCI); this is the same
for DMAs.
Auto (ESCD)
, Manual
PCI/VGA Palette Snoop
Enable this option to correct screen color shifts, when
there is a combination of VGA cards, accelerator cards,
or MPEG cards present.
Disabled
, Enabled
INT Pin 1-8 Assignment
Maximum Payload Size
This item allows you to select the payload size for PCI
Express device’s maximum TLP (Transmission Level
Point).
128, 256, 512, 1024, 2048,
4096
Reset Configuraton Data
[Disabled]
Resources Controlled By
[Auto(ESCD)]
X IRQ Resources
Press Enter
PCI/VGA Palette Snoop
[Disabled]
INT Pin 1 Assignment
[Auto]
INT Pin 2 Assignment
[Auto]
INT Pin 3 Assignment
[Auto]
ESCD) when you exit
INT Pin 4 Assignment
[Auto]
Setup if you have
INT Pin 5 Assignment
[Auto]
installed an new add-on
INT Pin 6 Assignment
[Auto]
and the system
INT Pin 7 Assignment
[Auto]
reconfiguration has
INT Pin 8 Assignment
[Auto]
caused such as serious
conflict that the OS
** PCI Express relative items **
cannot boot
Maximum Payload Size
[128]
Phoenix - Award BIOS CMOS Setup Utility
PNP/PCI Configurations
Select Enabled to
Item Help
Menu Level
X
Default is Disabled.
F5:Previous Values F7:Default Settings
KLIJ
:Move Enter: Select +/-/PU/PD :Value F10:Save ESC:Exit F1:General Help
reset Extended System
Configuration Data