![background image](http://html.mh-extra.com/html/acer/aspire-3300/aspire-3300_service-manual_5852038.webp)
30
System Utilities
IDE Primary Channel Slave
This parameter lets you configure the hard disk drive connected to the slave port
of IDE channel 1.
IDE Secondary Channel Master
This parameter lets you configure the hard disk drive connected to the master
port of IDE channel 2.
IDE Secondary Channel Slave
This parameter lets you configure the hard disk drive connected to the slave port
of IDE channel 2.
The following screen appears if you select any of the IDE Drive parameters:
IDE Primary/Secondary
Channel Master/Slave
Page 1/1
*Type ...................... [ Auto ]
*Cylinder ................ [ XXXX ]
*Head .................... [ XXXX ]
*Sector .................. [ XXXX ]
*Size .................... [ XXXX ] MB
*Hard Disk Size > 504MB .... [ Auto ]
*Hard Disk Block Mode ...... [ Auto ]
*Advanced PIO Mode ......... [ Auto ]
*Hard Disk 32 Bit Access ... [Enabled]
*DMA Transfer Mode ......... [ Auto ]
↑↓
= Move Highlight Bar
F1 = Help
Esc = Exit
→
←
= Change Setting,
NOTE *: Can only be seen when press
V
.
Type
This parameter lets you specify the type of hard disk installed in your system. If
you want BIOS to automatically configure your hard disk, select
Auto
. If you
know your hard disk type, you can enter the setting manually.
Setting this parameter also sets the Cylinder, Head, Sector, and Size
parameters.
Содержание Aspire 3300
