Acer AN515-51, Руководство по обслуживанию

Страница: 52 / 294

2-14 System Utilities
Removing a Password
Perform the following to remove a password:
NOTE:
Below are the procedures for removing the supervisor password. The same procedures apply
in removing the user and HDD passwords.
When the supervisor password is removed, the user password is automatically removed.
1.
Use the
↑
and
↓
keys to highlight the
Set Supervisor Password
parameter and press
Enter . The
Set Supervisor Password
dialog box appears.
Figure 2-12. Set Supervisor Password
2.
Type the current password in the
Enter Current Password
field and press Enter .
3.
Press Enter twice without typing anything in the
Enter New Password
and
Confirm New
Password
fields. The
Setup Notice
dialog box appears.
Figure 2-13. Setup Notice
4.
Press Enter to complete the password setting. The computer sets the
Supervisor
Password Is
parameter to
Clear
.
5.
Press F10 to save changes and exit BIOS Setup Utility .