manualshive.com logo in svg

Acer AL2002, Руководство по обслуживанию, Страница: 10 / 60

Поделиться
Скачать
Acer AL2002 Скачать руководство пользователя страница 10

                                                                           

Go to cover page

9

 

B.   OSD  Controls 

Item Description 

Brightness 

Backlight Luminance of the LCD panel is adjusted. 

Contrast 

A gain of R,G and B signal is adjusted. 

Color Temperature 

9300K, 8200K, 7500, 6500K, 5000K And User settings. 

Auto Adjust 

Clock system auto adjustment, about under 5 sec. 

Left/Right 

The indication screen is horizontally moved right and left (1 pixel pitch) 

Up/Down 

The indication screen is vertically moved up and down (1 pixel pitch) 

Pixel Clock 

The ratio of dividing frequency of the dot clock is adjusted. 

Phase 

The phase of dot clock is adjusted. 

OSD Language 

Select the language used for the OSD menu from between English, French, Italian, 

Deutsch, Spanish, Japan, Simple Chinese and Traditional Chinese. 

Recall Defaults 

All data copy from factory shipment data. 

OSD Position 

The OSD indication position can be selected. 

3.7.  Monitor Modes and Timing Capability: 

3.7.1.  Format and Timing 

The monitor shall synchronize with any vertical frequency from 56 to 76 Hz, and with any horizontal frequency 

from 30 to 81 KHz. If the input frequency is beyond the specified range, the monitor shall display a warning 

screen indicating that the input frequency is out of range. Under no circumstances shall any combination of 

input signals cause any damage to the monitor. 

 

3.7.2.  Factory Assigned Display Modes 

There are 11 factory pre-set frequency video modes. These modes have a factory pre-set for all characteristics 

affecting front-of-screen 

performance. When the system is powered-on, previously stored screen 

parameters for a pre-defined mode will be recalled if the operating mode is one of those stored in memory. If 

the operating mode is not one of those stored in memory, the monitor CPU will select the PRESET timing for a 

mode that is the next lowest in horizontal scanning frequency to the mode being currently used. The screen 

parameters may be adjusted by the use of the front bezel controls and then may be saved as a user defined 

mode. The monitor shall include all the preset video timings shown in the following page.   

  

 

3.7.3.  Mode Recognition Pull-in 

The monitor shall recognize preset modes within a range of +,- 1KHz whichever is less for horizontal ; and 

,- 1Hz for vertical. 

 

3.7.4.  User Display Modes 

In addition to the factory pre-set video modes, provisions shall be made to store up to 15 user modes. If the 

current mode is a user mode, the monitor shall select its previously stored settings. If the user alters a setting, 

the new setting will be stored in the same user mode. The user modes are not affected by the pre-set 

command. If the input signal requires a new user mode, storage of the new format is automatically performed   

during user adjustment of the display (if required). 

Содержание AL2002





























































Отзывы:

Нет отзывов