![background image](http://html.mh-extra.com/html/acer/acerpower-s260/acerpower-s260_service-manual_5774070.webp)
62
Chapter 4
Power-On Self-Test (POST)
Before the computer can be used, all the components must be tested and initialized, and the operating system
must be bootstrapped into memory. This process is know as the power-on Self test(POST), generally under
the control of the BIOS.
The Power-On Self Test (POST) is a BIOS procedure that boots the system, initializes and diagnoses the
system components, and controls the operation of the power-on password option. During POST, system
reports test or initialization failure through Beep codes, display error messages on screen(if available), or LED.
The system halts when fatal error occurs.
The main components on the main board that must be diagnosed and/or initialized by POST to ensure system
functionality are as follows:
T
Microprocessor with built-in numeric co-processor and cache memory subsystem
T
Direct Memory Access (DMA) controller
T
Interrupt system
T
Three programmable timers
T
ROM subsystem
T
RAM subsystem
T
RTC RAM subsystem and real time clock/calendar with battery backup
T
Onboard serial interface controller
T
Onboard parallel interface controller
T
Embedded hard disk interface and one diskette drive interface
T
Keyboard and auxiliary device controllers
T
I/O ports
T
PS/2-compatible mouse port
T
PS/2-compatible keyboard port
T
Serial ports
T
Parallel ports
T
USB port
Содержание AcerPower S260
Страница 8: ...IX Table of Contents Appendix C Online Support Information 103 ...
Страница 15: ...Chapter 1 7 Block Diagram ...
Страница 97: ...89 Chapter 6 Exploded Diagram ...