![background image](http://html.mh-extra.com/html/acer/acerpower-6100/acerpower-6100_user-manual_5726058.webp)
AcerPower 6100 (V66M/H61) User’s Guide
lviii
3.2.9
IDE Secondary Channel Slave
This parameter specifies the current configuration of the IDE device connected to the slave port of the secondary
IDE channel. For information on how to configure the IDE devices, see section 3.4.3.
3.2.10 Total Memory
This parameter specifies the total amount of onboard memory. The memory size is automatically detected by
BIOS during the POST (Power-On Self Test). If you install additional memory, the system automatically adjusts
this parameter to display the new memory size.
1st Bank
This parameter indicates the type of DRAM installed in the DIMM 1 socket. The None setting indicates that there
is no DRAM installed. For the location of the DIMM sockets, refer to Figure 2-1.
2nd Bank
This parameter indicates the type of DRAM installed in the DIMM 2 socket. The None setting indicates that there
is no DRAM installed. For the location of the DIMM sockets, refer to Figure 2-1.
3rd Bank
This parameter indicates the type of DRAM installed in the DIMM 3 socket. The None setting indicates that there
is no DRAM installed. For the location of the DIMM sockets, refer to Figure 2-1.
3.2.11 Serial Port 1
This parameter shows the serial port 1 ddress and IRQ settings.
Содержание AcerPower 6100
Страница 1: ...AcerPower 6100 User s Guide V66M H61 System Manual ...
Страница 115: ...Index cxv Figure 4 19 Attaching the Heatsink ...