1. Reset:
Press to reset if HDMI extender
doesn’t work properly
2. HDMI In:
Connect with HDMI source device
3. IR OUT:
Connect with IR Blaster cable
4. Power Jack:
Connect with power adapter
5. Power LED:
On when the device is powered
6. RJ45:
Link to the RX via a Cat5e/6 cable
7. Activity LED:
Bilnks during data transmission
8. LINK LED:
On when the TX/RX connected
Features
• Supports HDMI 1.3, HDCP 1.4
• Supports 1080p@60Hz
• Extend over a Cat5e/6 cable up to 120m
• Support IR frequence 20-60kHz
Package contents
• HDMI HDbitT Extender TX & RX
• Power adapter DC 5V/1A x2
• IR Blaster cable
• IR Receiver cable
• Quick Start Guide
Layout
Transmitter
Receiver
1. Reset:
Press to reset if HDMI extender
doesn’t work properly
2. HDMI Out:
Connect with HDMI display
3. IR IN:
Connect with IR Receiver cable
4. Power Jack:
Connect with power adapter
5. Power LED:
On when the device is powered
6. RJ45:
Link to the TX via a Cat5e/6 cable
7. Activity LED:
Bilnks during data transmission
8. LINK LED:
On when the TX/RX connected
