AceProAV AcePro-CE88-1, Быстрое руководство по установке

Страница: 3 / 12

- 2-
INTRODUCTION
The AcePro-CE88-1 HDMI 2.0 HDBaseT Extender with RS-232 & IR/PoC boosts up your
video/audio transmission distance to 60m (198ft) in HDTV 1080p with 36-bit color depth and 35m
(114ft) at 4K-HDR. AcePro-CE88-1 has new generation technology which makes sure the HDBaseT
extender can support HDMI2.0a and HDCP2.2. AcePro-CE88-1 also supports the most advanced
3D video format compliant with HDMI specification and therefore guarantees the highest 3D video
compatibility on the market. With only one cost-effective Cat.5/5e/6 cable, users can readily extend
HDTV sources from DVD players, Blu-ray Disc player, PS4, PC, and any other kinds of sources
compliant with TMDS to distant display monitors including HDMI or DVI enabled TV sets or LCD PC
monitors. With the advanced design for the latest HDMI technology, deep color video, DTS-HD or
Dolby TrueHD audio, and HDCP supports and compatibility are all further insured. AcePro-CE88-1
is also equipped with bi-directional IR pass-through path and RS-232 serial port control. These
bonus features allow users to boost RS-232 and IR control distance up to 60m (198ft) through only
single Cat.5/5e/6 cable with HDMI signals. In addition, AcePro-CE88-1 also supports PoC (Power
over Cable) which can power both units from either TX or RX with power supply.
The AcePro-CE88-1 includes two units: transmitting unit AcePro-CE88-1-TX and receiving unit
AcePro-CE88-1-RX. The transmitting unit is used to capture the input HDMI / DVI signals with IR
control packets and carry the signals via one cost effective Cat.5/5e/6 cable. The receiving unit is
responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control
signals. AcePro-CE88-1 offers the most convenient solution for digital signage with long distance
A/V transmission path.
FEATURES

HDMI 2.0a compliant

Supports 4K2K@60 4:4:4 8bits

Supports HDR
1
, which is 4K2K@60 4:2:0 10bits
2

Extends HDMI signal up to 60m (198ft) from the HDMI source at Full HD 1080p 36-bit, 35m
(114ft) at 4K2K@60 444 (4K-HDR Technology)

Supports PoC (Power over Cable) which can power both units from TX or RX side with power
supply

HDCP 2.2/1.4
3
& EDID Bypass

CEC support

Auto equalization

Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission

DTS-HD Master Audio and Dolby TrueHD high bit rate audio support

Supports full frequency IR signal from 20KHz to 60KHz

Bi-directional IR path-through

Full Duplex RS-232 control up to 115,200 bps through connector

Wall mounting housing design for easy and robust installation

Video latency less than 20 us.