Acekare Yomper 2.5 Plus, Руководство пользователя, Страница: 22 / 46

22 / 46
1.9 Setting up and ignition of the Yomper
First of all:
•
Check that the control box is in the off position (screen off, LED off).
•
Turn on the Yomper by pressing the POWER button (4). A
flashing LED indicates that the Yomper is waiting for its connection
with the control box.
The handle of the Yomper was deliberately placed in height to facilitate its installation.
The front casters of the Yomper serve for its stability for the setting up only. You do not need to make any
effort to put it in place, place it on the ground and roll it.
ATTENTION
When installing, do not place your fingers on the Yomper support bar at the risk of injury.
!