Acekare Yomper 2.5 Plus, Руководство пользователя, Страница: 13 / 46

13 / 46
1. Before you go with your Yomper
1. Installing the Yomper mounting bracket (by a professional)
1.6
The installation must be carried out in our workshops or by your medical equipment dealer.
1.6.1 Mounting bracket for rigid wheelchair
The mounting bracket of the Yomper is delivered already assembled.
It consists of the following elements:
•
2 parties fixes (A)
•
2 brides (A')
•
2 length adjustment parts (B)
•
2 brides (B')
•
2 rubber spacers (C)
•
one axis (D)
•
4 adjusting screws (E)
•
2 axle fixing screws (F)
A properly installed moutning bracket must meet the following requirements:
•
128 mm gap between the 2 flanges (see red arrow)
•
The whole is perfectly centered
!