8
2.2 The Front LEDs
LED
State
Description
POWER
ON
Press the button to power one the router.
ON
"Showtime"-successful connection between ADSL modem and telephone company's
network.
Flashing
"Handshaking"-modem is trying to establish a connection to telco's network Modem is
powered OFF ADSL Carrier Detect if LED is flash.
WAN
OFF
No link.
OP
Flashing The router running well.
WLAN
ON
When wireless AP is ready.
ON
Link
Flashing TX or RX activity
LAN
1-4
OFF
No Link
These four LAN (Local Area Network) ports are where you will connect networked
devices, such as PCs, print servers remote hard drives, and anything else you want to
put on your network.
2.3 The Rear Ports
Connector
Description
POWER
Power connector with 9VDC/ 1.5 Ampere.
LAN (1-4)
Router is successfully connected to a device through the corresponding port (1, 2, 3 or 4).
If the LED is flashing, the Router is actively sending or receiving data over that port.
WAN
The WAN (Wide Area Network) Port is where you will connect your cable, DSL modem or
Ethernet backbone.
Содержание Wireless 11g Router
