__________________________________________________________________________________
Horizon Series Owner’s Manual
2
Safety Notes:
•
The Horizon Series Dehumidifier must always be connected using the grounded
electrical connection as required from all electrical appliances. The warranty is voided
and all responsibility for the operation is born by the owner if non-grounded wiring is
utilized.
•
The Horizon Dehumidifiers must only be maintained and serviced by a qualified
technician.
•
The Horizon Dehumidifiers are intended only for operation when oriented with the unit
sitting on its feet and level. Any other orientation could cause water to come in
contact with the electrical components. Remove plug before moving dehumidifier. If
any water may have spread throughout unit, the unit should be opened and allowed
to dry thoroughly before reconnected to electric and restarting.
•
For proper operation, neither the inlet nor discharge should be positioned against a
wall. The inlet requires a minimum of 12” clearance and the discharge needs a
minimum of 24” clearance.
•
For proper diffusion of air throughout the room, the dehumidifier should be positioned
with the sides against a wall and the inlet and discharge perpendicular to the wall.
•
Do not insert any objects into the inlet or discharge. If service is required, call a
qualified technician. All work on unit should be done with the unit “off” and
unplugged.
•
Do not use water to clean unit exterior. Only use a damp cloth with unit unplugged.
•
Do not use unit as shelf or device to hang clothes. This could cause damage to unit.
•
The inlet filter generally needs cleaned no more than once per month. Check unit on
a weekly basis to insure that more frequent cleaning is not required.