Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 249 / 418

Installation and Operation Manual Chapter 6 Monitoring and Diagnostics
ACE-3105, ACE-3205 Ver. 5.2 Monitoring Performance 6-11
Parameter Description Possible Values
Malformed
Response Number of malformed access response
packets that were received from this
server. Malformed packets include
packets with an invalid length.
Bad authenticators (see below), signature
attributes or unknown types are not
included in this count.
Numerical
Bad Authenticators Number of access response packets
containing invalid authenticators or
invalid signature attributes received from
this server. Numerical
Pending Requests Number of access request packets that
are destined to this server but have not
yet timed-out or received any response
(access accept, access reject, access
challenge or access re-transmission) from
the server. Numerical
Timeouts Number of timeouts received from this
server. When a timeout is received,
ACE-3105, ACE-3205 may try to resend
the access request to the same server or
to a different server. A resend to the
same server counts as a re-transmit, and
a resend to a different server counts as
an access request. Numerical
Unknown Types Number of unrecognized packets that
were received from this server on the
authentication port. Numerical
Packets Dropped Number of packets that were received
from this server but were dropped (for
any reason) after passing through the
authentication port. Numerical
The Clear (C) command clears and resets all counters to 0.
Viewing the Syslog Statistics
If ACE-3105, ACE-3205 was set to log events on a Syslog server (see
Setting the
Syslog Parameters
in Chapter 4), you can display the statistics of these events.
³
To display the Syslog statistics:
• From the System menu (see
Figure 6-2
), select Syslog statistics.
The Syslog statistics are displayed.
Note